| MachoPowerWagon.com http://machopowerwagon.com/phpBB3/ |
|
| 1985 Factory roller lifter motor Questions http://machopowerwagon.com/phpBB3/viewtopic.php?f=18&t=2368 |
Page 1 of 1 |
| Author: | GoGoMacho [ Mon Jun 06, 2016 7:05 pm ] |
| Post subject: | 1985 Factory roller lifter motor Questions |
Looking for some information on my 1985 318 roller lifter block. (cast date November 1984). This is a factory roller lifter block with a new stock cam (and missing distributor gear/shaft). Does anyone know if these blocks (or newer style magnum roller blocks) use a bronze distributor gear. What I can find is not specific. Typically a retro fit roller cam must use a bronze gear due to the tool steel it's made from as apposed to cast iron in a flat tappet cam. Hopefully someone has a factory stock small block roller lifter motor apart and can verify if the distributor gear is steel or bronze. (a magnet will tell). Any help is appreciated. |
|
| Author: | palomino [ Fri Jun 17, 2016 3:31 pm ] |
| Post subject: | Re: 1985 Factory roller lifter motor Questions |
only thing I can say is go and buy one from dodge or go to a good machine shop and ask |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|