MachoPowerWagon.com http://machopowerwagon.com/phpBB3/ |
|
DANA 44 bearings. http://machopowerwagon.com/phpBB3/viewtopic.php?f=21&t=585 |
Page 1 of 1 |
Author: | LDB [ Thu Oct 22, 2009 9:44 pm ] |
Post subject: | DANA 44 bearings. |
I went off-roading last week only to totally destroy driver side wheel bearings on the way home. When the bearings went, the spindle ate into the steering knuckle. I finally found a knuckle on ebay, but I can't for the life of me find an exploded view of which way the bearings go back in. Since everything came out in tiny fragments, I am not sure of how they go back in properly. I think there is an inner and an outer bearing. But if any one could chime in here I am listening. I do not have locking front hubs. BTW the truck did phenomenal in the mud, I think I had a bad seal and the mud and water washed the grease out. Any help or pics would be greatly appreciated. |
Author: | palomino [ Fri Oct 23, 2009 1:58 am ] |
Post subject: | Re: DANA 44 bearings. |
http://mopartruckparts.com/tech/t010.html I hope this helps you out!!!! |
Author: | LDB [ Fri Oct 23, 2009 9:33 am ] |
Post subject: | Re: DANA 44 bearings. |
Thank you so much! That helps a ton, still can't believe that set up isn't on the internet more frequent. I figured it being a Dana it would be easily looked up online. Anyway I see the direction of the bearings now. You the man! |
Author: | palomino [ Fri Oct 23, 2009 8:15 pm ] |
Post subject: | Re: DANA 44 bearings. |
anytime! |
Author: | LDB [ Sat Oct 24, 2009 12:11 pm ] |
Post subject: | Re: DANA 44 bearings. |
Posting this info on here I found after days of searching and after palomino helped me out, in case anyone else runs into same probs. http://ramchargercentral.com/index.php? ... ow%3Bid=35 |
Author: | palomino [ Sat Oct 24, 2009 12:28 pm ] |
Post subject: | Re: DANA 44 bearings. |
that also looks like a good article.... |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |