MachoPowerWagon.com http://machopowerwagon.com/phpBB3/ |
|
440 intake http://machopowerwagon.com/phpBB3/viewtopic.php?f=27&t=2040 |
Page 1 of 1 |
Author: | tucool69 [ Sat Aug 10, 2013 12:41 am ] |
Post subject: | 440 intake |
just rebuilt the thermoquad on my 76 powerwagon , 440 auto 4.09 gears, is ther an ungrade intake manifold for this or is the stock one sufficient , motor is stock 56000 miles!! |
Author: | macho4x4warlock [ Sat Aug 10, 2013 12:12 pm ] |
Post subject: | Re: 440 intake |
Depends where your located. Your 440 came with an EGR emission system that is on your original manifold. If you were to ungrade to a 66-71 Mopar non EGR cast iron manifold you would be modifying the emission system......... That may matter if your in a state that requires emission inspections. If not, I would "upgrade" to an aftermarket aluminum manifold having a little cash sitting around for that project. |
Author: | tucool69 [ Sun Aug 11, 2013 8:52 pm ] |
Post subject: | Re: 440 intake |
thanks , my 440 has no emissions on it at all , its a bare bones motor , i am in canada so there are no emission laws!! its just a thought to change maifold while the carb is off! thanks |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |