It is currently Fri Sep 20, 2019 10:10 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 234 posts ]  Go to page Previous  1 ... 20, 21, 22, 23, 24  Next
Author Message
 Post subject: Re: My 1981 MACHO
PostPosted: Tue Oct 21, 2014 2:24 am 
Offline
Moderator
User avatar

Joined: Sun Aug 30, 2009 11:41 am
Posts: 501
Location: Loveland, CO
LAST440 wrote:
LOOKS Great!!

Thank you sir!! :D

kork340 wrote:
Sat and read through all 22 pages today. All I can say is WOW! Beautiful truck! Great find and nice work!! Would love to find an 80's Power Ram in decent shape. Most trucks around here are rusted to Hades. Nice junkyards you got up there too.

Thank you as well! Is it really 22 pages worth? Geez. I never thought I'd own an '81 -- let alone a Macho and it still amazes me that I have this one! Finding a nice 80s Power Ram in general is hard as most are pretty beat, rusty, or beyond saving even out this way.

The junkyards really ebb and flow out here -- this past summer and fall it's been pretty slim pickins for older vehicles although hopefully it picks up again in the near future!


Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Tue Oct 21, 2014 1:02 pm 
Offline

Joined: Fri Sep 24, 2010 8:16 am
Posts: 126
Location: Dysart Pa.
Yeah, around here most of the older trucks are rotted. Just missed an 87k original mile 86. Called last night and he'd sold it last week. Still need to get down to Pittsburgh to check out that 79 "could be" Macho. I'm second shift and he's daylight. We both work 6-8 day stretches as well. Going to try and get there Mon tho as I am off.


Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Sat Jun 27, 2015 9:01 am 
Offline
Moderator
User avatar

Joined: Sun Aug 30, 2009 11:41 am
Posts: 501
Location: Loveland, CO
Since I haven't updated this in a long time, it seems like the Dodge dealers are no longer able to get senders for the 30 gallon tanks (there are about 20 on back order with no expected delivery date -- they said they're not dropped yet, but that isn't a good sign either).

However after doing some research there is a Mopar restoration site based just 20 minutes north of me in Fort Collins, CO that has started carrying them. Unlike the zinc coated OE units, these are stainless steel and are only $100 (for 30 or 20 gallon tanks). I got to drive up and meet the owner and his wife (they operate out of a large garage and outbuilding on their property). Very nice people and although they don't carry much for the trucks, he said the senders have been selling like hotcakes since they started carrying them in March (more than any they sell for cars, etc)!

Their website is: http://www.521restorations.com or eBay store: http://www.ebay.com/itm/121614122663 (30 gallon sender for reference).

Attachment:
521 Restorations - 30 gallon sender - FG8187T30.JPG
521 Restorations - 30 gallon sender - FG8187T30.JPG [ 52.64 KiB | Viewed 1819 times ]


Image
(filler neck grommet replaced too as the old one was in bad shape)

I also removed the electric fuel pump from the truck as well -- for one it was mounted above the tank (where the installation instructions said this Carter was supposed to be mounted lower than the tank) so it was constantly working too hard which I think made it wonky. Basically it was getting starved for fuel once it'd been running for a while and the vehicle came to slow traffic or a stop.

It was installed prior to me buying the truck -- and I never liked the fact that if the ignition was switched to on it was running. I had never paid that close of attention, but it looks like the new mechanical pump that was installed with the new engine was bypassed. I'm not quite sure why, but I'm assuming the creased/nearly folded over filter on the old sender was the culprit.

With the electric pump removed and a NEW mechanical pump installed it seems to be running great! I also took the time to replace all of the rubber lines back by the tank/frame rail as well as up in the engine bay.


Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Sat Jun 27, 2015 12:25 pm 
Offline
Moderator

Joined: Thu Aug 14, 2008 10:37 am
Posts: 1498
Location: Truckin thru NEVADA
NICE!
Good info on the sending units too :D


Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Sat Jun 27, 2015 2:22 pm 
Offline
Moderator
User avatar

Joined: Sun Aug 30, 2009 11:41 am
Posts: 501
Location: Loveland, CO
Reasonably priced and local pickup for me! :D

FWIW when I was searching there was one other seller in the northeast on eBay who looked to be selling the same stainless steel units too.


Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Tue Jun 30, 2015 10:13 pm 
Offline
Moderator

Joined: Thu Aug 14, 2008 10:37 am
Posts: 1498
Location: Truckin thru NEVADA
From the interweb!

Take a close look at this one.


Attachments:
FB_IMG_1435633720687.jpg
FB_IMG_1435633720687.jpg [ 46.21 KiB | Viewed 1800 times ]
Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Tue Jun 30, 2015 11:32 pm 
Offline
Moderator
User avatar

Joined: Sun Aug 30, 2009 11:41 am
Posts: 501
Location: Loveland, CO
Turbines...plaid and cashmere bench...and 2X or is that the angle?

*edit* and the higher end grille/headlight bezels since they look to be chrome?


Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Wed Jul 01, 2015 12:09 am 
Offline
Moderator
User avatar

Joined: Tue Aug 12, 2008 8:33 pm
Posts: 1870
Location: The "PALOMINO Ranch", Central California.
I'm digging the plaid seat!!!!
Turbines... interesting...

_________________
when in doubt, gas it hard!!!
Proprietor, "The PALOMINO Ranch", where old dodge trucks have a home...
Image


Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Wed Jul 01, 2015 10:08 am 
Offline
Moderator
User avatar

Joined: Sun Aug 30, 2009 11:41 am
Posts: 501
Location: Loveland, CO
Me too... 8-)
(albeit the wrong upholstery for the Macho, they don't look bad in there, minus the rips/tears... ;) )

Image


Top
 Profile  
 
 Post subject: Re: My 1981 MACHO
PostPosted: Wed Jul 29, 2015 5:01 pm 
Offline
Moderator
User avatar

Joined: Sun Aug 30, 2009 11:41 am
Posts: 501
Location: Loveland, CO
Well after a month and a half of trying to get it to pass emissions it finally passed today -- for the last time!

By the time 2020 rolls around it will be 39 years old -- and in Colorado all 39 year old vehicles are now exempt from emissions testing! So, will just have to go in and pay the 5 years of fees (which in the end is cheaper than paying even 4 single years).

Image

Oh and when I got back to the shop to put the new plates on, this was sitting next to it...Dodge gods must be appeased? :mrgreen:

Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 234 posts ]  Go to page Previous  1 ... 20, 21, 22, 23, 24  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Theme by Shadow_One from SE-Tuning